Basic Operations; Operation Modes; Base Operation Modes; Handset Operation Modes - EnGenius DuraFon User Manual

Basic Operations

Operation Modes

Both the base station and handset have feature levels that can only be accessed
when in certain modes.
A. Base Operation Modes
1. STANDBY mode- this is the default mode. The page key is active in standby
mode only. The base "Power" LED will light up during this mode.
2. TALK mode- the base station operates in this mode during a phone call. The
"In Use" LED will light up only for a FXO call.
3. REGISTRATION mode- the base station enters this mode by pressing and
holding the REG button for 3-seconds. The INTERCOM LED will be blinking in
"Registration" mode, and a prompt sound will be emitted.
B. Handset Operation Modes
1. STANDBY mode- this is the default mode.
a. If there is no on-going activity, the handset
automatically goes into SLEEP/STANDBY mode to save
battery power.
b. The handset can be turned off completely by holding
down the
c. The standby screen display (custom name) can be
edited.
d. The 2-dight number represents the handset ID.
2. MENU mode
a. Press the (Right) soft function key to activate Menu
mode.
b. In Menu mode, the handset settings and information
contained in the memory can be changed.
c. The functions available through the Menu selection
are covered in greater detail starting on page 63.
d. The Menu structure display as below:
key for 3-seconds.
~27~