Basic Operations; Operation Modes; Base Operation Modes; Handset Operation Modes - EnGenius EP802 User Manual

Basic Operations

Operation Modes

Both the base station and handset have levels of operation at which time
only certain procedures of functions can be performed.
A. Base Operation Modes
1. STANDBY mode- this is the default mode. The page key is active in
standby mode only. The base "Power" (blue color) LED will light up
during this mode.
2. TALK mode- the base station operates in this mode during phone call.
The "In Use" (white color) LED will light up during this mode.
3. REGISTRATION mode- the base station enters this mode by pressing
the PAGE button for three seconds. The "Power" (blue color) LED will
be blinking in "Registration" mode, also a prompt sound will be emitted.
B. Handset Operation Modes
1. STANDB mode- this is the default mode.
a. If there is no on-going activity, the handset
automatically goes into SLEEP/STANDBY mode
to save battery power.
b. The handset can be turned off completely by
holding down the key for 3 seconds.
c. The standby screen display (custom name) can
be edited.
d. The 2-dight number represents the handset ID
2. MENU mode
a. Press the Right soft function key to activate Menu
mode.
b. In Menu mode, the handset settings and
information contained in memory can be changed.
c. The functions available through the Menu
selection are covered in greater detail from page
53.
d. The Menu structure display as below:
Main Menu
1.KeyGuard
SELECT BACK
~27~
3. Menu Tree
~28~