Removing And Replacing The Ball Bearing Rails - HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual

Removing and replacing the ball bearing rails

Removing and replacing the ball bearing rails
WARNING: WARNING:
To reduce the risk of personal injury or damage to the equipment, you must adequately support
the enclosure during installation and removal.
Prerequisites Prerequisites
Before you begin, be sure that you have the following items:
Appropriate screwdriver for the screws in the rack.
Optional installation tool (695539-001), if the rails were installed using it.
Procedure Procedure
1. Power down the server.
2. Extend the server from the rack .
3. Disconnect the cabling.
4. Remove the server from the rack .
5. Place the server on a sturdy, level surface.
6. Do one of the following:
(Optional) Remove the rail without a tool.
(Optional) Remove the rail with the tool.
Removing and replacing the ball bearing rails 66