Preparation Procedures - HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual

Preparation procedures

Preparation procedures
To access some components and perform certain service procedures, you must perform one or more of the following procedures:
Extend the server from the rack .
If you are performing service procedures in a Hewlett Packard Enterprise, Compaq branded, Telco, or third-party rack cabinet, you
can use the locking feature of the rack rails to support the server and gain access to internal components.
For more information about Telco rack solutions, refer to the RackSolutions.com website
Power down the server.
If you must remove a server from a rack or a non-hot-plug component from a server, power down the server.
Remove the server from the rack .
If the rack environment, cabling configuration, or the server location in the rack creates awkward conditions, remove the server from
the rack.
RackSolutions.com website.
Preparation procedures 53