HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual page 5

5.1.1 Selecting the boot mode
5.1.2 Secure Boot
5.1.3 Launching the Embedded UEFI Shell
5.2 iLO Service Port
5.3 Intelligent Provisioning
5.4 HPE Insight Remote Support
5.5 HPE InfoSight for servers
5.6 USB support
5.6.1 External USB functionality
5.7 Smart Storage Administrator
6 Component identification
6.1 Front panel components
6.2 Front panel LEDs and buttons
6.2.1 UID button functionality
6.2.2 Front panel LED power fault codes
6.2.3 Systems Insight Display combined LED descriptions
6.3 Rear panel components
6.4 Rear panel LEDs
6.5 System board components
6.5.1 System maintenance switch descriptions
6.5.2 NMI functionality
6.5.3 DIMM label identification
6.5.4 DIMM slot locations
6.5.5 Processor and socket components
6.6 Device numbers
6.7 Drives
6.7.1 HPE Basic Drive LED definitions
6.8 DSC-25 2-port SFP28 card ports and LEDs
6.9 Fan bay numbering
7 Cabling
7.1 Cabling overview
7.2 SFF cables
7.3 Cable routing: HPE Smart Array MR416i-a controller
8 Specifications
8.1 Environmental specifications
8.2 Server specifications
8.3 Power supply specifications
8.3.1 HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
8.3.2 HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
8.3.3 HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply
8.3.4 HPE 800 W Flex Slot Universal Hot-plug Low Halogen Power Supply
8.3.5 HPE 800 W Flex Slot -48 VDC Hot-plug Low Halogen Power Supply
8.3.6 HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
8.3.7 HPE 1600 W Flex Slot -48 VDC Hot-plug Power Supply