HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual page 156

HPE Basic Drive LED definitions HPE Basic Drive LED definitions
LFF low-profile drive carrier LFF low-profile drive carrier
The LFF low-profile drive carrier supports hot-plug SAS and SATA drives .
SFF basic drive carrier SFF basic drive carrier
The SFF basic drive carrier supports hot-plug SAS, SATA, and NVMe drives .
Item Item LED LED
1 Fault/Locate
2 Online/Activity
Status Status
Solid amber
Solid blue
Flashing amber/blue
Flashing amber
Solid green
Flashing green (1 flash per
second)
Flashing green (4 flashes per
second)
Off
Definition Definition
This drive has failed, is unsupported, or is invalid.
The drive is operating normally and being identified by
a management application.
The drive has failed, or a predictive failure alert has
been received for this drive. The drive has also been
identified by a management application.
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
The drive is online and has no activity.
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
The drive is operation normally and has activity.
The drive is not configured by a RAID controller or is a
spare drive.
HPE Basic Drive LED definitions 156