Canon imageRUNNER 1019J Service Manual page 62

Chapter 9
9.4.1.1.3 Detaching the Rear Cover
1) To release the hooks at the back of the machine,
move the machine backward until the hooks are
about 5 cm away from the edge of the desk and so
on.
2) Remove the screw [1].
3) Release the three claws[2] at the right and the
three claws [3] at the top.
4) Release the two claws [4] at the bottom, and then
detach the rear cover [5].
[1]
[4]
F-9-6
0013-2401
[3]
[2]
[5]
9.4.1.1.4 Detaching the Reader Left Cover
1) Open the left door.
2) Remove the two screws [1], and then detach the
reader left cover [2] as shown.
[2]
F-9-7
9.4.1.1.5 Detaching the Front-left Cover
1) Detach the reader left cover.
2) Remove the two screws [1].
3) Open the left door, and then remove the screw [2]
4) Detach the front-left cover [3].
F-9-8
0013-2403
[1]
0013-2404
[1]
[2]
[3]