Canon imageRUNNER 1019J Service Manual page 101

Chapter 15
Tonal signal reception test
MODEM TEST
OFF OFF OFF
OFF OFF OFF
DTMF signal reception test
MODEM TEST
OFF OFF OFF 5
The received DTMF signals are indicated starting
from the right using the 2nd character of the display.
V.34 G3 Signal Transmission Test
A press on '8' on the keypad from the MODEM test menu selectes the V.34 G3 signal transmission test. The
V.34 G3 signals below are sent from the modem using the modular jack and the speaker by pressing the start
key. The Baud rate can be changed with the keypad, and the Speed c an be changed with the left/right arrow key.
Keypad
0
1
2
3
4
5
Left/right arrow key
<
>
changes from '0' to '1' in response to detection of a signal of 462
changes from '0' to '1' in response to detection of a signal of 1100
changes from '0' to '1' in response to detection of a signal of 2100
F-15-16
Baud rate
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
Transmission speed
2400bps
4800bps
7200bps
9600bps
12000bps
14400bps
16800bps
19200bps
21600bps
24000bps
26400bps
25 Hz.
30 Hz.
25 Hz.