Chapter 15
15.8 Registration of Accessories (ACC)
15.8.1 Accessory Registration
The table below gives summary description of the ac cessories available.
Item
#ACC
CARD
CC-SPSW
COIN
CONTROL
Explanation
Card reader installation setting
Enter a card number to use.
(0 to 9999. One hundred cards are registered with the department ID beginning
from the input card number in sequence.)
*1:1,000 cards if option ROM is mounted.
When a card number is entered, the following kinds of management information
are initialized:
- Card name (department ID), beginning from the input card number.
- Password associated with the card
Control card I/F support setting
Set whether to support the control card I/F (CC-V) or not.
0: Do not support.
1: Support.
Coin vendor change
Set the control card set display appearing on the operator station for vendor use.
0: Control card use
1: Coin vendor use
Set the PDL printer output control where the control card I/F (CC-V) is
supported.
0: Enable printing without a card mounted.
1: Enable printing with a card mounted in position.
0013-7948