Chapter 3
[1]
[4]
F-3-4
7) Remove the shaft [1], and remove the separation
roller [2].
[1]
F-3-5
3.1.3 Feed Rollor
[2]
3.1.3.1 Removing the Cassete Feed Roller
1) Remove the cassette.
2) Place the machine with the rear side down.
3) While pressing the separation roller [1] to rele ase
the pressure, remove the boss [2] and slide the
feed roller upward until the shafts [3] are
separated.
4) Pull out the feed roller [4] to remove it.
[3]
5) Remove the bushing [1] and shaft [2], and then
remove the feed roller [3].
[2]
[2]
[1]
[3]
F-3-6
[2]
[1]
F-3-7
0012-7751
[4]
[3]