System Requirements And Smart Software Compatibility; Using The Magic Pen - SMART Board 6000S Series User Manual

Chapter 2
Using basic features

System requirements and SMART software compatibility

This table shows the version of iQ system software or SMART software required for each Tool Explorer tool.
Tool
Tool Explorer multicolor 4-pen bundle
Tool Explorer double-ended Highlighter
Tool Explorer Magic Pen
Tool Explorer Learn 4-Cube Bundle
Tool Explorer Math 4-Cube Bundle
Tool Explorer Play 4-Stamp Bundle

Using the magic pen

Use the magic pen to write or draw digital ink that fades after a few seconds. You can write or draw over any
input or content as the magic pen isn't limited to a specific application.
You can also use the magic pen to open a spotlight or magnification window to focus attention to a specific
area of the screen.
NOTE
For information about the iQ system software or SMART software version required for each Tool Explorer
tool, see System requirements and SMART software compatibility above.
To use the magic pen to write or draw ink that fades
1. Pick up the magic pen.
2. Use the "nib" end of the pen to write in magic ink.
smarttech.com/kb/171415
iQ system software version
3.6 or later
3.6 or later
3.6 or later
3.6 SP3 or later
3.6 SP3 or later
3.6 SP3 or later
SMART software installed on a connected
computer
SMART Product Drivers SMART Notebook
20.0 or later 12.16 or later
20.0 or later 12.16 or later
N/A (provided by iQ 3.6 N/A (provided by iQ 3.6
or later) or later)
Not supported Not supported
Not supported Not supported
Not supported Not supported
30