Using Tool Explorer Stamps - SMART Board 6000S Series User Manual

Chapter 2
Using basic features
To delete an object
1. Tap the object.
A selection rectangle appears around the object.
2. Press the object's menu arrow, and then select Delete.

Using Tool Explorer stamps

Tool Explorer stamps feature a single shape, number, image, and more, that is inserted as an object when
you tap the stamp's face on the display's screen. You can move, resize, rotate, delete the object. Stamps are
ideal for younger children and early learners.
TIP
You can store the stamps in place of the erasers at the bottom of the display's frame. Two stamps fit on
each magnetic holder.
NOTE
For information about the iQ system software or SMART software version required for each Tool Explorer
tool, see System requirements and SMART software compatibility on page 30.
To insert an object using a Tool Explorer stamp
1. Pick up a stamp.
2. Tap the stamp's face on the screen.
The image on the stamp is inserted as an object.
TIP
The inserted object can be made smaller by tapping a portion or corner of the stamp's face on the
screen.
smarttech.com/kb/171415 34