Maiwe MIGE3028-4GF User Manual page 8

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch
Table 2-1 Description of the indicators on the front panel
PWR1
ALARM
PWR2
Green
Green
Red light
light
light on cycle
off
blink
Normal No
Alarm
power alarm
The description of the indicators on the network port is shown in Table 2-2.
Table 2-2 Description of the indicators on the network port
100M RJ45 port
Yellow light Green light
On Off On Blink
100M optical interface
The 100M optical port can be divided into single mode or multi-mode fiber
interface, and the connector can be SC, ST or FC. The fiber interface needs to
be used in pairs (TX and RX are a pair), the TX port is the optical transmitter,
and the optical transceiver RX of the optical interface of another remote switch
is connected; the RX port is the optical transceiver, and the same optical
interface is connected to the same remote switch. The light ends TX.
RUN Link/Act
Green
light Green light
cycle on
blink
The
Link
system is
establishm
working
ent
properly
100M Fx port
Green light
Off On Blink
- 4 -
10/100M
Green light Green
blink light on
Data
100M
transmission
Gigabit Fx port
Yellow light
Off On Off
Speed
Green
Green light Green
light
on light off
off
No
1000M link gigabit
10M establishm or only
ent
100M
or 10M
Green light
On Blink Off