Hardware Installation And Networking; Hardware Structure; System Structure; Machine Structure - Maiwe MIGE3028-4GF User Manual

MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch

2. Hardware Installation and Networking

2.1. Hardware Structure

2.1.1. System Structure

The system hardware is mainly composed of the following parts:
Switched network controller uses high-performance ASIC chip
technology to provide Layer 2 wire-speed forwarding of data packets
Fiber interface adopts optical transceiver module for stable performance
Power supply uses industrial grade power supply with over-current,
over-voltage and EMC protection
All data ports are EMC protected

2.1.2. Machine Structure

The chassis of this series is a 19-inch 1U rack structure. The whole
machine adopts a six-sided fully enclosed structure. The left and right side
panels of the chassis are made of single-ribbed aluminum profiles and are part
of the overall cooling system. Abandoning the traditional heat sink cooling form,
reducing the power consumption of the whole machine and improving the
stability of the system.
The outline of the MIGE3028 series is shown in Figure 2-1:
482.6*44*210mm (width × height × depth).
Figure 2-1 Diagram of the MIGE3028 chassis
The front panel indicators of this series of switches indicate the current
working status of the switch. The details are shown in Table 2-1 below.
- 3 -