Related Manuals for Maiwe MIEN2016
Summary of Contents for Maiwe MIEN2016
- Page 1 MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch User Manual Edition: V2.0) Wuhan Maiwe Communication Co., Ltd.
- Page 2 This trademark is owned by Wuhan Maiwe Communication Co., Ltd. Mwring is the trademark used for link redundancy and self-recovery technology, owned by Wuhan Maiwe Communication Co., Ltd. Microsoft and Windows is registered trademark owned by Microsoft. Copyright Copyright © Wuhan Maiwe Communication Co., Ltd.
- Page 3 MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Safe Use Instruction This product performance is excellent and reliable in the designed range of use, but it’s necessary to avoid man-made damage or destroy for the equipment. Read the manual carefully and keep this manual for reference if need afterwards.
-
Page 4: Table Of Contents
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Catalogue 1. System Overview............- 1 - 1.1. Product Introduction..............- 1 - 1.2. Characteristic................- 1 - 1.2.1. Industrial network performance............- 1 - 1.2.2. Industrial application design............. - 1 - 1.2.3. Packing list..................- 1 - 1.3. -
Page 5: System Overview
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch 1. System Overview 1.1. Product Introduction The unmanaged simple series products produced by Maiwe including MIEN2016, MIEN2024, MIEN2018-2S/M and MIEN2026-2S/M, are industrial Ethernet switches that are professionally designed and developed for industrial high-speed communication network applications. The switch is mainly used for simple plug-and-play applications. -
Page 6: Performance Specifications
User manual Product Certificate and Warranty Card 1.3. Performance specifications Maiwe switches can complete Ethernet information exchange. Users must refer to the following data for reasonable selection and use in order to show good industrial characteristics and excellent network information exchange capabilities. -
Page 7: Application Description
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch 2. Application Description 2.1. Hardware structure 2.1.1. System structure The system hardware is mainly composed of the following parts: The switching network controller uses high-performance ASIC chip technology to provide Layer 2 wire-speed forwarding of data packets. - Page 8 MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch The port has established a 100M network 100Mbps Green connection No port connection or 10M access Port has Panel established a status valid network connection Port has LINK/AC Flashing network Green activity The port has...
-
Page 9: Hardware Installation
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch servers, hubs or other switches using straight-through network cables/crossover network cables. Each port supports IEEE802.3x adaptive, so the most suitable transmission mode (half-duplex or full-duplex) and data rate (10Mbps or 100Mbps) can be automatically selected (the connected device must also support this feature). -
Page 10: Host Installation
Grounding and wiring can effectively suppress the noise impact caused by electromagnetic interference. The ground connection should be made before connecting the equipment, from the ground screw to the ground surface. 2.2.2. Host installation The installation dimensions of MIEN2016 and MIEN2024 are shown in Figure 2-5. - 6 -... -
Page 11: Cable Connection
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Figure 2-5 Schematic diagram of the installation dimensions of MIEN2016 and MIEN2024 The installation dimensions of MIEN2018-2S/M and MIEN2026-2S/M are shown in Figure 2-6. Figure 2-6 Installation dimensions of MIEN2018-2S/M and MIEN2026-2S/M For most industrial applications, 19-inch rack installation is very convenient. -
Page 12: Fiber Optic Connection
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch The terminal device interface provided by this product is a 10Base-T/100Base-TX Ethernet RJ45 interface, which uses a straight-through network cable to connect to the terminal device and a crossover network cable to connect to the network device. -
Page 13: Simple Test
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Before laying the cable, check whether the cable is damaged, whether there are factory records and quality assurance certificates that prove its quality The specifications, quantity, routing direction, and location of the cables to be laid should meet the design requirements of the construction drawing,... -
Page 14: Copper Port Test
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch 2.3.2. Copper port test As shown in Figure 2-7, power up the device, connect any two electrical ports to the network ports of two test computers through a direct-connected network cable, and send Ping commands to each other. Both parties can correctly ping each other without packet loss. - Page 15 MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Figure 2-9. Figure 2-9 ICMP setting interface diagram Then click Start→Run of test computer 1, enter cmd or command (cmd for Win2000/XP system, command for WIN98/95 system), a console window will pop up, and send ping 192.168.0.11 –l 1000 –t, (–l It refers to the number of bytes to send data packets, -t refers to continuously sending data), run ping 192.168.0.10 -l 1000 -t in test computer 2 in the same way.
-
Page 16: Maintenance And Service
For product maintenance, replacement or return, in accordance with the processing procedures of Wuhan Maiwe Communication Co., Ltd., you should first confirm with the technicians of Maiwe and then negotiate with the sales staff to complete the repair, replacement or return of the product. - Page 17 MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch Our company has the right to change the product model without notifying the user. For the latest information, please consult our company's market or technical support staff. - 13 -...
- Page 18 WUHAN MAIWE COMMUNICATION CO.,LTD Add.:Building 2, Area E, Phase ii, Optical valley core center, No.52, Liufang road, East Lake Hi-tech Development Zone,Wuhan,China Phone: 027-87170215/16 Fax: +86-027-87170217 www.maiwe.com...
Need help?
Do you have a question about the MIEN2016 and is the answer not in the manual?
Questions and answers