Related Manuals for Maiwe MIGE3028-4GF
Summary of Contents for Maiwe MIGE3028-4GF
- Page 1 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch User Manual Edition: V1.0) Wuhan Maiwe Communication Co., Ltd.
- Page 2 Copyright Copyright © Wuhan Maiwe Communication Co., Ltd. Clarification The user manual is applicable to MIGE3028-4GF series managed rack industrial ethernet switch. Please read the following license agreement carefully before using this manual. The products described in this manual can be used only if you agree on the following license agreement.
- Page 3 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Safe Use Instruction This product performance is excellent and reliable in the designed range of use, but it’s necessary to avoid man-made damage or destroy for the equipment. Read the manual carefully and keep this manual for reference if need afterwards.
-
Page 4: Table Of Contents
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Catalogue 1. System Overview............- 1 - 1.1. Product Introduction..............- 1 - 1.2. Characteristic................- 1 - 1.2.1. Industrial Network Performance............- 1 - 1.2.2. Industrial Application Design............- 1 - 1.3. Packing List................... - 2 - 1.4. -
Page 5: System Overview
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch 1. System Overview 1.1. Product Introduction MIGE3028-4GF series rack industrial Ethernet switches manufactured by Wuhan Maiwei Photoelectric Technology Co., Ltd. are designed and developed for industrial high-speed communication network applications. This series of switches is used for simple application in plug-and-play mode. -
Page 6: Packing List
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch 1.3. Packing List The package list of the switch of Wuhan Maiwe Communication Co.,Ltd. is shown in Table 1-1 below. If any of the listed items is lost or destroyed, please contact the agent or the customer service center of Wuhan Maiwe Communication Co.,Ltd. -
Page 7: Hardware Installation And Networking
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch 2. Hardware Installation and Networking 2.1. Hardware Structure 2.1.1. System Structure The system hardware is mainly composed of the following parts: Switched network controller uses high-performance ASIC chip technology to provide Layer 2 wire-speed forwarding of data packets Fiber interface adopts optical transceiver module for stable performance... - Page 8 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Table 2-1 Description of the indicators on the front panel PWR1 ALARM Link/Act 10/100M Speed PWR2 Green Green Green Green light light Green light Green light Green Green light Green light light light on...
- Page 9 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch The 100M optical interfaces mainly include: SC, ST, and FC, as shown in Figure 2-2. Figure 2-2 Schematic diagram of a 100 Mbps optical interface Ethernet RJ45 port Each RJ45 port has an adaptive function that supports automatic MDI/MDI-X connections.
- Page 10 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch SFP modules hot Swap step showed as fig 2-4. Figure 2–4 SFP module hot swap Hot plugging steps: Take the end of the PCB cheat. The gold finger end is turned back to the PCB board and inserted into the metal shielding cage of the SFP.
- Page 11 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch The power requirements are shown in Table2- 3 Table2- 3 Switch power requirement table Voltage Operating Storage Voltage Humidity range temperature temperature -40°C 12VDC 9~18VDC -4°C ~+85°C 5~95% ~+85°C -40°C~+85° -40°C~+85° 24VDC 18~36VDC 5~95% -40°C~+85°...
-
Page 12: Hardware Installation
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Figure 2-6 2.2. Hardware Installation 2.2.1. Installation Requirements This series of industrial Ethernet switches is a single unit that can be mounted directly into a 19-inch rack.Before installing, first confirm that there is a suitable working environment, including power requirements, sufficient space, whether it is close to other network devices and other devices to be connected. -
Page 13: Host Installation
2.2.2. Host Installation Switch as a whole is schematically shown in FIG2-7. FIG 2-7 The top side of the machine MIGE3028-4GF series of schematic front panel shown in FIG.2-8. FIG2-8MIGE3028-4GF series switch front panel MIGE3028-4GF -24Trear panel2-9 is schematically shown in FIG. -
Page 14: Cable Connection
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Figure2-10 shows the rear panel of the MIGE3028-4GF-4S/M-20T. Figure2-10 MIGE3028-4GF-4S/M-20T switch front panel MIGE3028-4GF-8S / M-16T is a schematic view of the rear panel shown in FIG2-11. Figure2-11 MIGE3028-4GF-8S/M-16T switch front panel MIGE3028-4GF -12S/ M-12T is a schematic view of the rear panel shown in FIG 2-12. -
Page 15: Fiber Optic Connection
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch The 100M Tx port is 10Base-T / 100Base-TX Ethernet RJ45 interfaces,Gigabit Tx port is 10/100/ 1000 Base-TX SFP electrical interface.Connect to the terminal device using a straight-through cable and connect to the network device using a crossover cable. -
Page 16: Simple Test
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch its quality. The specifications, quantity, routing direction, and placement position of the required cables should conform to the construction drawing design requirements. The wiring length of each cable should be determined according to the actual location. - Page 17 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch correctly Ping to each other without loss .Description tested two electrical interface hardware is working properly. Figure2-15 Tx port test schematic Example of PING command: A test computer's IP address is192.168.16.220,the test computer IP address as192.168.16.221,make sure the local connection of two Firewall...
-
Page 18: Fx Port Test
MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch 2.3.3. Fx Port Test The composition of the two devices as shown in Figure 2-18 of the optical chain network.Each electrical port of each device is connected to the test computer through a direct connection network cable, and sends PING commands to each other.Both parties can correctly ping the other party without... -
Page 19: Repair And Service
Since the date of delivery, Wuhan Maiwe Communication Co., Ltd. provides a 5-year product warranty.According to the product specifications of Wuhan Maiwe Communication Co., Ltd., during the warranty period, if there is any malfunction or functional failure of the product, we will repair or replace the product for the user without charge.However, the above commitments do not... - Page 20 MIGE3028-4GF Serial Rack Mounted Industrial Ethernet Switch Gigabit Fx/ Tx Model 100M Tx port 100M Fx port port MIGE3028-4GF- MIGE3028-4GF- 4S/M-20T MIGE3028-4GF- 8S/M-16T MIGE3028-4GF- 12S/M-12T MIGE3028-4GF- 16S/M-8T MIGE3028-4GF- 24S/M Note: Our company has the right to change the model number without notifying the user.For the latest information, please consult our marketing or...
- Page 21 WUHAN MAIWE COMMUNICATION CO.,LTD Add.:Building 2, Area E, Phase ii, Optical valley core center, No.52, Liufang road, East Lake Hi-tech Development Zone,Wuhan,China Phone: 027-87170215/16 Fax: +86-027-87170217 www.maiwe.com...