Table Of Contents - Ulvac MBD Series Instruction Manual

Table of contents

Our product has been fully inspected before shipment. However, please make
sure that there is no damage or shortage of delivered items by checking the
shipping list below and the external view of the products.
CRYO METER MBD-S/MBD-T (with power cable)
Clamp kit (Holder & Set Screw×2)
Connector set (R03-PB3M, R03-PB2F) （See table.3-1）
Instruction Manual
The length of the power cable is 3m fixed.
(*1)
Types of cables for connecting MBD-S/MBD-T to MBS-C or MBS are listed on page 2
(*2)
(Table 1-2) in MBS-C instruction manual. Please refer the table and order
appropriate one. These cables are not included in MBD series.
Note: A connector set will be provided with MBD-S/MBD-T, not with those cables.
Inspection and Adjustment of CRYO METER MBD series
Please contact our technical service department when inspection and/or adjustment
of CRYO METER MBD series are needed. No circuit or any other parts of this
product may be changed and/or adjusted in any shape or form in any circumstances.
Note that any inspection, check, adjustment and repair caused by such change
and/or adjustment will be only accepted at your expense even if it is within the
warranty period .
II
SHIPPING LIST
ITEM
ULVAC CRYOGENICS INCORPORATED
QUANTITY
(*1)
(*2)
1
1
1
1