Canon FINISJER-E1 Service Manual page 14

CHAPTER 1 GENERAL DESCRIPTION
III. OPERATING THE MACHINE
A. Removing Paper Jams
If the Jam indicator turns on to indicate the presence of a jam in the finisher, perform the
following:
1) Grasping the grip, disconnect the finisher from the copier.
2) Remove the paper visible from the outside.
Caution:
Do not remove the paper from the intermediary processing tray before removing the jam.
3) Connect the finisher to the copier.
1-6
Figure 1-301
Figure 1-302
Figure 1-303
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)