Advertisement
CHAPTER 2 BASIC OPERATION
V. STAPLING
1.
Outline
The machine's stapler unit is fixed in position at the rear, and is not deigned to shift or swing.
The stapler unit staples at a single position only, and stapling is on the front side of a stack and
from under.
The machine does not provide manual stapling or manual insertion stapling.
The size of paper and the thickness of each stack for stapling are as follows:
Reference:
If the number of sheets (copies or originals) is higher than the number of sheets allowed for
stapling, the stack will not be stapled but will be delivered to the stack tray.
2-42
Paper size
A4, A4R, B5
LTR, LTR
B4
LGL
A3
279mm x 432mm (11 x 17)
Table 2-501
Figure 2-501
COPYRIGHT © 1999 CANON INC.
Paper thickness (sheets)
30
20
15
Stapling home
position
Stapling position
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
