Advertisement
CHAPTER 2 BASIC OPERATION
3.
Rear Jogging (staple sort)
The machine's stapler is fixed in position at the rear so that they are put into order at the rear
when staple mode is selected.
When the Copy Start key has been pressed and the copier has communicated the paper size, the
rear jogging plate moves to the home position and the front jogging plate moves to a specific point*
and kept in wait.
*Half of the width of the paper from the middle of the tray + 10 mm to the front.
Paper arriving from the copier is moved to the intermediary processing tray.
When paper has been deposited on the intermediary processing tray, the returning roller butts it
against the stopper plate so that it is put into order in feeding direction. The paper is then moved to
the stapling position, and put into order once again toward the rear by the work of the front jogging
plate.
Half of paper
width +10mm
2-30
Figure 2-414a
A3,A4
20mm
Figure 2-414b
COPYRIGHT © 1999 CANON INC.
Home position of
the rear jogging plate
Middle of the stack tray
Home position of
the front jogging plate
Home position of the
rear jogging Plate
Home position of the
front jogging plate
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
