Advertisement
CHAPTER 2 BASIC OPERATION
3.
Counting the Sets on the Stack Tray
Table 2-602 shows the maximum number of sheets allowed on the stack tray.
In staple mode, the number of sets on the stack tray is checked to identify the stacking limit in
addition to the result of detecting the height of the stack.
Each single stack is counted as one, and a stack tray overstacking condition is identified when
the total reaches 30, upon which a communication is sent to the copier. In response, the copier
indicates a message on its control panel prompting removal of the stacks.
If staple sort is selected while paper exists on the stack tray, the copier will indicate a message
on its control panel requesting the removal of the paper. If the Copy Start key is pressed without
removing the paper, the sheets may not always be put into order or stapled correctly.
If the Copy Start key is pressed without removing the paper, the count will be cleared at the
press and a new count is started.
2-50
Small-size
Medium-size
Large-size
Table 2-602
COPYRIGHT © 1999 CANON INC.
Stacking limit
30 (30 stacks max.)
30 (20 stacks max.)
30 (15 stacks max.)
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
