Canon FINISJER-E1 Service Manual page 154

General Timing Chart
(2 originals, 2 sets; stapling ON)
Copier power-on
Inlet sensor (S2)
Delivery motor (S2)
Stack processing *3
motor (M2)
Returning roller home
position sensor (S3)
Stack lever home
position sensor (S8)
Intermediary processing
tray paper sensor (S5)
Front jogging
plate motor (M4)
Front jogging plate home
position sensor (S6)
Rear jogging
plate motor (M4)
Rear jogging plate home
position sensor (S7)
Stapling ON signal
*2
Stack tray lifter
motor (M5)
Stack tray paper
height sensor (S10)
Stack tray paper
sensor (S11)
Stack processing motor: CW stack delivery/CCW returning
Front jogging plate motor: CW
Rear jogging plate motor: CW
Stack tray lifter motor: CW
*1: A-B delivery signal (n number of stack, nth sheet).
*2: Moved down until the stack tray paper height sensor turns off.
*3: Driven until the stack delivery lever home position sensor turns on.
*4: Driven until the returning roller home position sensor turns on.
*5: Moved up 12.5mm after the stack tray paper sensor turns on.
*6: 0.7 sec.
*7: 4 sec. (approx.)
*8: Driven until the front jogging plate home position sensor turns on.
*9: Driven until the rear jogging plate home position sensor turns on.
COPYRIGHT © 1999 CANON INC. CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Copy start key ON Receiving paper size info
*6 *7
*4
*8
*9
*5 *2
: CW rotation : CCW rotation
move to front/CCW move to rear
move to rear/CCW move to front
move up/CCW move down
1-1 delivery signal*1
*11 *11
*12 *13 *12 *16
*10 *14 *15 *14
*10
*5
*10: The front/rear jogging plate is moved to the wait position.
*11: Varies depending on the length of paper.
*12: 0.2 sec.
*13: 0.35 sec. (approx.)
*14: Varies depending on the size of paper.
*15: Returned to the wait position (*10)
*16: To prevent interference with the stack during delivery, the returning is given roller a 1/8 turn after it has reached its home position.
*17: 0.5 sec.
*18: Driven until the stack delivery lever reaches its home position.
*19: Turned on 0.1 sec after the returning roller turns off.
*11 *11
*17 *18 *12 *13 *12 *16
*15 *14 *15
*19
*2 *5
*17 *18
*14 *15
*19
*2 *5
A-4