Advertisement
1st sheet delivery signal
Inlet sensor (S2)
Delivery motor (M1)
Stack processing
motor (M2)
Returning roller home
position sensor (S3)
Stack delivery lever home
position sensor (S8)
Intermediary processing
tray paper sensor (S5)
Front jogging
plate motor (M3)
Front jogging plate home
position sensor (S6)
Rear jogging
plate motor (M4)
Rear jogging plate home
position sensor (S7)
Stapling ON signal
Stack tary lifter
motor (M5)
Stack tray paper
height sensor (S10)
Stack tray paper
sensor (S11)
: CW rotation
Stack processing motor: CW
Front jogging plate motor: CW
Rear jogging motor: CW
Stack tray lifter motor: CW
*1: Varies depending on the length of paper.
*2: 0.2 sec.
*3: 0.3 sec.
*4: ON for 0.1 sec after the returning roller turns off
*5: 0.5 sec.
*6: Stops temporarily.
*7: Driven until the stack tray paper height sensor turns off.
*8: When the stack tray has moved up and stopped, driven until the stack delivery lever reaches its
home position.
COPYRIGHT © 1999 CANON INC.
*1
*2
*3
: CCW rotation
stack delivery/CCW
move to front/CCW
move to front/CCW
move up/CCW
Figure 2-411b
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
2nd sheet delivery signal
*1
*2
returning
move to rear
move to front
move down
*3
*5
*6 *8
*4
*7
2-25
Advertisement
Chapters
