Advertisement
CHAPTER 3 MECHANICAL SYSTEM
D.
Points to Note When
Tightening the Self-
Tapping Screws
1) Match the tip of the screw against the
screw hole, and turn the screw
counterclockwise until a click is felt when
the screw and the screw hole (thread and
tap) engage.
2) Turn the screw clockwise.
3-4
COPYRIGHT © 1999 CANON INC.
Figure 3-107
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
