Table of Contents
Advertisement
CVRC-M-1D
Field Startup
Service Settings - Field Startup
The Field Startup Group password is
<Enter>. The Field Startup Group contains items which are primarily
associated with Field Commissioning of the chiller as well as the
fundamental control and protection of the chiller subsystems. If the Field
Start-up Group password is entered, the display goes to the menu
defined below. If a key is not pressed for 10 minutes or more in this
password protected menu, the display returns to the Chiller Operating
Mode display of the Chiller Report, and the password must be entered
again to return to this menu.
Field Startup Group Heading
Field Startup Group Settings
Press <Next > <Previous to Continue >
This header is not suppressed when the headers are suppressed in the
Service Settings menu.
Keypad/Display Lock Feature Enable
This feature permits the entire Keypad and Display to be locked out. A
message appears on the screen to describe this condition. No access is
permitted to either the Report screens or the Setting Screens when this
feature is both Enabled here and Locked at the Service Settings Menu. It
is important to note that in this condition both the <Stop > and <Auto >
keys do not function.
Keypad/Display Lock Feature:
Press <+> <- > to Change Setting
Possible values of [d/e] are: Enable, Factory default is Disable.
When the keypad lock feature is disabled, the keypad lock display does
not appear in the non-password protected area of the Service Settings
menu and the Keypad/Display cannot be locked. When the
keypad/display lock feature is Enabled, the keypad lock display does
appear in the Service Settings menu so the keypad can be locked.
Menu Settings Password Enable
The Menu Settings Password permits the Settings in each of the menus
to be password protected. All Report Menus and Setting Menus can still
be viewed at any time if this feature is either Enabled or Disabled; the
<Stop > and <Auto > keys also remain active. If this feature is Enabled,
then all Menu Settings are password protected.
Menu Settings Password Feature:
Press <+> <- > to Change Setting
Possible values of [d/e] are: Enable, Factory default is Disable.
When the feature is Disabled, the Menu Setting Password display does
not appear at the top of each of the Settings Menus and the Menu
Settings cannot be password protected. When the Menu Setting
Password feature is Enabled, the Menu Settings Password display
appears just below each of the Settings Menus Header so the settings
can be changed if the proper password is entered.
-
-
[d/e]
[d/e]
55
Advertisement
Table of Contents
