Trane CVRC-M-1D Manual page 40

40
Report
Compressor Power Factor and Watts
The following will be displayed only if the Line Voltage Sensing Option is
installed and the starter type is not AFD and external KW is not installed.
Compressor Power Factor
Compressor Kilo Watts
Compressor Winding Temperatures
The following screen will be suppressed if FastPak motor over
temperature protection setpoint is set to MTC.
Compressor Winding Temperatures
W1 XXXF/C
Compressor Starts and Running Time
The starts and hours counters are displayed as follows:
Compressor Starts:
Compressor Running Time:
Bearing Temperatures #1 and #2
Bearing Temperatures #1:
Bearing Temperatures #2:
Solid State Starter Heat Sink Temp
The following will be displayed only if the Solid State Starter is installed.
Solid State Starter Heat Sink:
Press <Next> <Previous> To Continue
HGBP Time
The following will be displayed only if HGBP is installed in the unit. This
report shows total time in HGBP.
HGBP Time:
Press <Next> <Previous> To Continue
XX%
XXXX KW
W2 XXXF/C W3XXXF/C
XXXXX
HRS:MIN:SEC
XXX.X F/C
XXX.X F/C
XXX.X F/C
HRS:MIN:SEC
CVRC-M-1D