Removing The Power Cord - Supermicro SuperWorkstation 5038A-I User Manual

S W
uper orkstation 5038A-I User's Manual
6-2

Removing the Power Cord

Before performing any setup or maintenance on the chassis, use the following
procedure to ensure that power has been removed disconnected from the system.
Removing the Power Cord
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply.
3. Disconnect the cord from the power strip or wall outlet.
6-2
Figure 6-1. Chassis Front View
USB Ports
(2x USB 3.0)
6-3
Chapter 6: Advanced Chassis Setup
Main Power
Audio
Microphone
Four SATA
Drive Bays
(inside chassis)