Supermicro SuperWorkstation 5038A-I User Manual page 64

S W
uper orkstation 5038A-I User's Manual
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will
be claimed by the EHCI driver. The settings are Enabled and Disabled.
XHCI Mode
This feature handles the operation mode for the XHCI (Extensible Host Controller
Interface) controller. The settings are Smart Auto, Auto, Enabled, and Disabledl.
EHCI1
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
7-32
PCH-FW (Firmware)
The following information for the PCH Firmware.
•
ME FW Version - displays the Management Engine version number.
•
ME Firmware Mode - displays the Management Engine mode.
•
ME Firmware Type
•
ME Firmware SKU - displays the Management Engine SKU size.
ME FW Image Re-Flash
This item will update the PCH Firmware from an omage in a USB Flashdrive at-
tached to a USB port. The options are Enabled and Disabled. This feature is
supported on the X10SRA only.
7-33
BIOS