Supermicro SuperWorkstation 5038A-I User Manual page 66

S W
uper orkstation 5038A-I User's Manual
•
Dual Boot Order #5
•
Dual Boot Order #6
•
Dual Boot Order #7
•
Dual Boot Order #8
•
Dual Boot Order #9
•
Dual Boot Order #10
•
Dual Boot Order #11
•
Dual Boot Order #12
•
Dual Boot Order #13
•
Dual Boot Order #14
Network Drive BBS Priorities
•
Legacy Boot Order #1, the options are [IBA GE Slot 0500 ...] and Disabled.
7-36
BIOS Features
Bootup Numlock State
The default is checked (Activated).
Quiet Boot
The default is checked (On), the buzzer is silent.
AddOn ROM Display Mode
This item sets the display mode for the Option ROM. Select Keep Current to use the
current AddOn ROM Display setting. Select Force BIOS to use the Option ROM dis-
play mode set by the system BIOS. The options are Force BIOS and Keep Current.
Wait for "F1" for Error
This option sets whether the system will wait for the user to press "F1" when an
error is detected during POST. The default is checked (On).
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
7-37
BIOS