Supermicro SuperWorkstation 5038A-I User Manual page 63

S W
uper orkstation 5038A-I User's Manual
CPU SLOT6 PCI-E 3.0 X16 - Gen X
Auto, Gen1 (2.5 GT/s), Gen2 (5 GT/s) and Gen3 (8 GT/s).
Detect Non-Compliant Device
device installed on any of the PCIE slots. The options are Enabled and Disabled.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled.
CPU SLOT1 PCI-E 3.0 X8 (IN X16) OPROM,
CPU SLOT2 PCI-E 3.0 X8 (IN X16) OPROM,
PCH SLOT3 PCI-E 2.0 X1 (IN X4) OPROM,
CPU SLOT4 PCI-E 3.0 X8 (IN X16) OPROM,
PCH SLOT5 PCI-E 2.0 X1 (IN X4) OPROM,
CPU SLOT6 PCI-E 3.0 X16 OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy
mode and EFI to activate the slot in EFI mode. The options are Disabled, Legacy,
and EFI.
Onboard LAN Option ROM Type
Select an option to enable Option ROM support to boot the computer using a
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using a PXE
using a device installed in a LAN port. The options for Onboard LAN1 Option ROM/
Onboard LAN2 Option ROM are Disabled and PXE.
Onboard Video Option ROM (X10SRA-F Only)
Select the type of Video Option ROM support. The options are Disabled, Legacy
and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are Auto (for the X10SRA), Onboard VGA (for the
X10SRA-F), CPU SLOT1 PCI-E 3.0 X8 (IN X16), CPU SLOT2 PCI-E 3.0 X8 (IN
X16), PCH SLOT3 PCI-E 2.0 X1 (IN X4), CPU SLOT4 PCI-E 3.0 X8 (IN X16), PCH
SLOT5 PCI-E 2.0 X1 (IN X4), and CPU SLOT6 PCI-E 3.0 X16.
Legacy and EFI.
7-30
USB Settings
The following will be displayed:
•
USB Devices - this displays a list of the detected USB devices.
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable
legacy support if there are no legacy USB devices present. Select Disable to have
all USB devices available for EFI applications only. The options are Enabled,
Disabled and Auto.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Ex-
tensible Host Controller Interface) hand-off. The XHCI ownership change should be
claimed by the XHCI driver. The settings are Enabled and Disabled.
7-31
BIOS