Supermicro SuperWorkstation 5038A-I User Manual page 75

S W
uper orkstation 5038A-I User's Manual
The two built-in Gb LAN ports will also appear:
Please note that if the LAN ports do not appear as above, go back to the Main
Menu and return to Network Stack to refresh the screen. These new options are
clickable, and each has its own settings underneath:
7-54
There are two options under this link:
Link Speed
on the actual speed supported on the connected network. The options are Auto
Negotiated, 10Mbps Half, 10 Mbps Full, 100 Mbps Half and 100Mbps Full.
Wake on LAN (WOL)
Select Enabled to activate this feature, which enables the system to 'wake
up' from sleep when it receives a LAN wake up signal through this port. The
options are Disabled, and Enabled.
Blink LEDs
corresponding LED on the LAN port associated with these BIOS settings. Please
enter a numeric value, in seconds.
Port status and other information are displayed in this area:
UEFI Driver, Adapter PBA, Chip Type, PCI Device ID, PCI address, Link Status,
MAC Address and Virtual MAC Address.
7-55
BIOS