Starter Assembly; Shaft Assembly - Spacerails LEVEL 4 Quick Start Manual

F

STARTER ASSEMBLY

Step 1: Connect Arm Holder B to
300mm Shaft. Insert Arm Lock.
G

SHAFT ASSEMBLY

Arm Holder B
Step 1: Slide Arm Holder B of each arm on
to a shaft and lock in place with Arm Lock.
Refer to the next page for orientation and
location of each arm.
Page 6
Step 2: Connect the Starter pegs
to the Arm Holder.
NOTE:
Please see the included full-size drawings for the next
several steps. This will simplify the positioning of base,
arms, shafts, and the rail cut lengths.
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Step 3: Ensure the Starter is at
a slight angle so the Marble will
run smoothly.
Step 4: Attach Rail Clips and
Start Block Cover to Starter.
This is how the pieces are
referenced on the shaft drawings.
Arm
See-Saw