NetApp AFF A200 System Documentation page 1192

restore -address *
If the command fails, contact NetApp Support.
mysupport.netapp.com
b. Verify that the
Restored
display available:
c. Shut down the impaired node.
3. If you saw the message This command is not supported when onboard key management is enabled,
display the keys stored in the onboard key manager:
a. If the
Restored
▪ Go to advanced privilege mode and enter
▪ Enter the command to display the OKM backup information:
show
▪ Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ Shut down the impaired node.
b. If the
Restored
▪ Run the key-manager setup wizard:
target/impaired node name
▪ Verify that the
manager key show -detail
▪ Go to advanced privilege mode and enter
▪ Enter the command to backup the OKM
▪ Copy the contents of the backup information to a separate file or your log. You'll need it in disaster
scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ You can safely shutdown the node.
Option 2: Check NVE or NSE on systems running ONTAP 9.6 and later
Before shutting down the impaired node, you need to verify whether the system has
either NetApp Volume Encryption (NVE) or NetApp Storage Encryption (NSE) enabled. If
so, you need to verify the configuration.
column displays
security key-manager query
column displays yes, manually backup the onboard key management information:
set -priv admin
column displays anything other than yes:
Enter the customer's OKM passphrase at the prompt. If the passphrase cannot be
provided, contact mysupport.netapp.com
Restored column shows
Make sure that OKM information is saved in your log file. This info will be needed in
disaster scenarios where OKM might need to be manually recovered.
set -priv admin
yes for all authentication keys and that all key managers
security key-manager key show -detail
when prompted to continue:
y
security key-manager setup -node
yes for all authentication keys:
when prompted to continue:
y
information:security key-manager backup show
set -priv advanced
security key-manager backup
security key-
set -priv advanced
1189