Logout" Menu - RK Rose+Krieger RK MultiControl II duo Assembly Instructions Manual

Selecting a menu
Fig. 127: Selecting a menu
Reloading factory settings
Fig. 128: Reloading factory settings
Setting the language
Carrying out an initialization run
7.5.10

"Logout" menu

20.08.2021
Prerequisite:
n The main menu for the hand switch is displayed
1.
2.
3.
4.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Select the menu via "Control" ® "Reload factory settings"
(Fig. 127).
ð The message
"All settings will be reseted! Are you sure?" (Fig. 128) is
displayed.
Press the button (
ð The factory settings are reloaded.
The parameter settings are reset and the
memory positions and the software final
positions are deleted. The error history
remains in place.
Setting the language Ä Page 179.
Carry out an initialization run
The function allows you to end a previous pass-
word session. This can be used to disable func-
tions or enter another password.
The password session is ended automatically after
30 minutes.
Operating the hand switch with 6 function buttons
Control menu > Logout menu
Ä Page 169.
)
Ä Page 180.
211