Parameter" Menu; Transfer Parameters" Menu - RK Rose+Krieger RK MultiControl II duo Assembly Instructions Manual

Operating the hand switch with 6 function buttons
Control menu > Parameter menu
Selecting a menu
Fig. 121: Selecting a menu

7.5.8 "Parameter" menu

7.5.8.1

"Transfer parameters" menu

Selecting a menu
Fig. 122: Selecting a menu
206
Prerequisite:
n The main menu for the hand switch is displayed
Prerequisite:
n The main menu for the hand switch is displayed
1.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Select the menu via "Control" ® "Service" ® "Options
register display" (Fig. 121).
ð The customised activated options for control units with
special functions are displayed.
The function allows you to transfer the settings
from one MultiControl II to another or multiple other
control units with the same software version.
Select the menu via "Control" ® "Parameter" ® "Copy set
of parameterset" (Fig. 122).
ð The "Transfer parameters" menu (Fig. 123) is displayed.
Ä Page 169.
Ä Page 169.
20.08.2021