RK Rose+Krieger RK MultiControl II duo Assembly Instructions Manual page 186

Operating the hand switch with 6 function buttons
Control menu > Commissioning menu
Fig. 74: Start the initialization
Selecting drive group management
Fig. 75: Configuring drive group man-
agement
Setting drive group 2
Fig. 76: Setting drive group 2
186
3.
4.
5.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Do not start the initialization run despite the
displayed message.
Press the button to select the main menu
Select the menu via "Control" ® "Commissioning" ®
"Configure drive group management" .
ð The message "Specification of drive type for drive group
2" (Fig. 68) is displayed.
The first drive group is set in the factory.
Setting the drive type for the second drive group
ible drives on page 141.
Ä Page 169.
Ä Compat-
20.08.2021