Deactivate Drive Group Management" Menu - RK Rose+Krieger RK MultiControl II duo Assembly Instructions Manual

Operating the hand switch with 6 function buttons
Control menu > Commissioning menu
7.5.1.2

"Deactivate drive group management" menu

Premium version
Drive group management
182
The drives of the first group are connected to drive slots M1 and
M2, the drives of the second group are connected to drive slots M3
and M4
In order to facilitate the function of the respective group, drive slots
M1 and M3 must be occupied at all times.
The following configurations are possible:
Total
M1
M1 + M2
M1 + M3
M1 + M2 + M3
M1 + M3 + M4
M1 + M2 + M3 + M4 M1 + M2
Control unit RK MultiControl II duo/RK MultiControl II quadro
This function is only available with the premium
version.
The Multilift I and Multilift Synchro cannot be used
with the premium version of the MultiControl II con-
trol unit.
The function allows you to adjust two defined drive
groups on a MultiControl II quadro individually,
synchronously or parallel to each other.
The function can be selected during initialization.
Ä Page 142.
Drive group 1
M1
M1 + M2
M1
M1 + M2
M1
Drive group 2
-
-
M3
M3
M3 + M4
M3 + M4
20.08.2021