Changing The Hold And Cook More Times - Prince Castle EHB-CE Series Operation Manual

Extended Hold Bin
EHB-CE Series
Changing the Hold and Cook-More Times (Standalone Mode)
The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.
1
Press and hold the PRINCE CASTLE LOGO button,
then immediately press and hold the ENTER button until the display shows one of six programming menus.
Use the UP or DOWN Arrow button to scroll to the PROD TIME ↑ ↓ ENTR (Set Product Time) menu.
Press and release the ENTER button to enter the Set Product Time menu. The display will show BURG TIME ↑↓ ENTR.
2
Use the UP or DOWN Arrow button to scroll through the list of products.
When the desired product is displayed, press the ENTER button to select it.
NOTE: Holding the UP or DOWN Arrow button for longer than 2 seconds will cause the product list to automatically scroll up or
The display will show 90 ↑↓ ENTR.
3
Use the UP or DOWN Arrow button to scroll to the desired
Hold time. When the desired Hold time is displayed, press
the ENTER button to save the desired Hold time.
NOTE: Hold time cannot be reduced to less than the Cook-More
time plus one minute. NOTE: All times are displayed in minutes only.
For example, 2 and half hours is displayed as 150
The display will show BURG TIME ↑ ↓ENTR. Repeat Steps 2 – 4 for any other product.
5
Press and release the PRINCE CASTLE LOGO button at any time to exit the Program Mode and return to the Run Mode.
NOTE: If the ENTER button has not been pressed to save any changes, the program will revert to the original values.
Printed in USA 05/19 © 2019
The display will show COOK 03 ↑ ↓ ENTR.
4
Use the UP or DOWN Arrow button to scroll to the desired
Cook-More time. When the desired Cook-More time is
displayed, press the ENTER button to save it.
NOTE: Cook-More time cannot be increased to more than the
Hold time, minus one minute.
10 540-541revJ-EN