Changing The Hold And Cook More Times - Prince Castle EHB22 Series Operation Manual

1 The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.
Press and hold the PRINCE CASTLE LOGO button on the button bar,
then immediately press and hold the ENTER button until the display shows one of six programming menus.
Use the UP or DOWN Arrow button to scroll to the PROD TIME ↑ ↓ ENTR (Set Product Time) menu.
Press and release the ENTER button to enter the Set Product Time menu. The display will show EGGS TIME ↑↓ ENTR.
2
Use the UP or DOWN Arrow button to scroll through the list of products.
When the desired product is displayed, press the ENTER button to select it.
NOTE: Holding the UP or DOWN Arrow button for longer than 2 seconds will cause the product list to automatically scroll up or down.
The display will show 240 ↑↓ ENTR.
3
Use the UP or DOWN Arrow button to scroll to the desired Hold time. When the desired Hold time is displayed, press the ENTER
button to save the desired Hold time.
NOTE: Hold time cannot be reduced to less than the Cook-More time plus one minute. NOTE: All times are displayed in minutes only.
For example, 2 and half hours is displayed as 150.
The display will show COOK 30 ↑ ↓ ENTR.
4
Use the UP or DOWN Arrow button to scroll to the desired Cook-More time. When the desired Cook-More time is displayed, press the
ENTER button to save it.
NOTE: Cook-More time cannot be increased to more than the Hold time, minus one minute.
The display will show EGGS TIME ↑ ↓ENTR. Repeat Steps 2 – 4 for any other product.
5
Press and release the PRINCE CASTLE LOGO button at any time to exit the Program Mode and return to the Run Mode.
NOTE: If the ENTER button has not been pressed to save any changes, the program will revert to the original values.
540-1730_EN rev.B
Changing the Hold and Cook-More Times
Extended Holding Bin
General Market Series
9 Printed in USA 07/2023 © 2023