Installing Antennas - Cisco 897VAW Installation Manual

Installing the Cisco 810 ISR
Figure 2-22
Replace the panel and the screws.
Step 8

Installing Antennas

Before you install the Cisco 819 ISR on a table, wall, or DIN rail, install the antennas on the front panel.
Note
It is difficult to install the antennas after the router is installed.
To attach the radio antennas to your wireless router, follow these steps:
Manually screw the antenna tight to the TNC connectors on the back of the router. (See
Step 1
Figure 2-23
Step 2 Orient the antennas. For optimum wireless performance, antennas should be generally perpendicular to
each other.
If the router is being mounted on a desk, orient the antennas straight up.
Cisco Integrated Services Router Hardware Installation Guide
2-26
Locking the SIM Socket Cover
Installing the Antenna
Chapter 2 Installing the Router
Figure 2-23.)