Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual page 40

Bracket Disassembly
1
2
3
4
5
Procedure
Step 1
Remove the two screws (1) that hold the two DIN rail clamps (2).
Step 2 Slide the DIN rail clamps (2) away from the plastic latches (4) and remove them.
Step 3
Slide the plastic latches (4) off the DIN rail plate, and remove the two springs (3).
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
32
Screws
DIN rail clamps
Springs
Plastic latches
DIN rail clips
Installing the Router