Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual page 79

GPS Field Replaceable Unit Module
Figure 28: GPS Module Insertion
1
2
Step 3 Align the previously removed screws (1), with the screw holes (2), and tighten to 2-3 in-lb (0.2-0.3 Newton
meter).
Step 4 The installation is now complete.
Step 5
To remove the module, reverse the steps:
a. Power off the device.
b. Remove the screws.
c. Pull out the module.
Screws
Screw holes
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Installation and Removal of a GPS FRU Module
71