European Community, Switzerland, Norway, Iceland, And Liechtenstein; Declaration Of Conformity With Regard To R-Ed Directive 2014/53/Eu - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Regulatory Compliance
• 2461A-WPWIFI6
This Class A Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
This device complies with Class A Limits of Industry Canada. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Cisco
device in a system operating either partially or completely outdoors may require the user to obtain a license
for the system according to the Canadian regulations. For further information, contact your local Industry
Canada office.
This device has been designed to operate with antennas having a maximum gain of 8 dBi. Antennas having
a gain greater than 8 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotopically radiated power (EIRP) is not more than that permitted for successful communication.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference
to co-channel mobile satellite systems.
Users are advised that high-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN
devices.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
European Community, Switzerland, Norway, Iceland, and
Liechtenstein
Cisco
• IR1821
• IR1831
• IR1833
• IR1835

Declaration of Conformity with Regard to R-ED Directive 2014/53/EU

The following standards are applied:
• ETSI EN 301 489-1 V2.2.3; EN 301 489 - 17 v3.2.4
• Draft ETSI EN 301 489-19 V2.2.0 (2020-09)
• Draft ETSI EN 301 489-52 V1.1.2
®
Catalyst IR1800 Rugged Series Router are certified to the requirements of RSS-247. The use of this
®
Catalyst IR1800 Rugged Series Router PIDS.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide

European Community, Switzerland, Norway, Iceland, and Liechtenstein

95