Attaching The Antennas - Cisco C1109-2PX Upgrade

Attaching the Antennas

LED
SIM1
GPS
Service
RSSI
Attaching the Antennas
To attach the antenna in the Pluggable Interface Module, perform the following steps.
Install and Upgrade Internal Modules and Field Replaceable Units
16
Color Function
Green, Yellow SIM1 LED/Activity
Green, Yellow GPS LED
Green, Yellow, Blue
Service Indication LED (Applicable for P-5GS6-GL)
Green, Yellow RSSI LED (Applicable for P-LTE-XX, P-LTEA-XX,
P-LTEAP18-GL )
Install and Upgrade Internal Modules and Field Replaceable Units
• Off: SIM0 is not installed
• Yellow: SIM0 is installed, but not active
• Green: SIM0 installed and active
• Green Blink: LTE data activity
• SIM1 LED status and WWAN activity
• Off: SIM1 is not installed
• Yellow: SIM1 is installed, but not active
• Green: SIM1 installed and active
• Green Blink: LTE data activity
• Off: GPS is not configured
• Yellow: Software is defined
• Green: GPS is configured
• Green Blink: GPS is functional
• Yellow: 3G
• Green: 4G LTE
• Blue: 5G
• Green: 4G LTE
• Yellow: 3G