Supported Cisco Antennas And Cables - Cisco 807 Hardware Installation Manual

— 2x RJ45 10/100 Fast Ethernet

Serial Ports
— Isolated 1 x RJ45 RS232 DTE Port
— Isolated 1 x RJ45 RS232 DCE Port, with NO DCD support

USB Ports
— 1x USB2.0 Type A External Host Port
— 1x USB 2.0 mini USB Type B console port

Compliance
— Class A EMC or better
— IP30 compliant when vertical and ports downward

Industrial temperature [-40ºC to +60ºC, 13.8Kft (operating), 15Kft (non-operating)]

One alarm input
Antennas
The Cisco IR807 ships without antennas. All antennas are options that can be ordered separately.
There are two TNC connectors on the front side of the device. The TNC connectors are used to connect to the 4G
modem. The SMA connector is for the GPS antenna.
NOTE: Before choosing your antenna type and installation scenario, read through the following information.

Supported Cisco Antennas and Cables

The following section lists the supported Antennas and Cables for the Cisco IR807. For detailed information about Cisco
Antennas, please refer to the following guides:
Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide:
http://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing-combined/industrial-routers-and-i
ndustrial-wireless-antenna-guide.html
Cisco Aironet Antennas and Accessories Reference Guide
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186
a008008883b.html
The following antennas and cables are available:
ANT-3-4G2G1-O
Description: Cisco Quinta 3 element 3-in-1 transportation antenna

2x 4G cellular, 1xGPS

Color: Black radome

RoHS compliant

Environment: Outdoor
16