Hazardous Locations Standards And Marking Strings - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Regulatory Compliance
Note This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or only nonhazardous locations.
Note This equipment is rated as follows- DC Input Voltage: Maximum Operating Range: 9.6V to 32VDC; Nominal:
12/24 VDC.
Note This product is suitable for use in environmental air space in accordance with Section 300.22.C of the National
Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
You should not install the power supply or power injector in air-handling spaces.
Note
The maximum ambient operating temperature range is –40 to 140°F (–40 to 60°C).

Hazardous Locations Standards and Marking Strings

The following standards were used for the hazardous locations approvals and certifications:
• CSA C22.2 No. 60079-0:19, 4th Ed., Issued 2019-0
• CAN/CSA-C22.2 No. 60079-7:16, 2nd Ed., Issued 2016-10
• CSA C22.2 No. 213-17, 3rd Ed., Rev. 2019-08-26
• EN IEC 60079-0:2018 EN IEC 60079-7: 2015 +A1:2018
• EN IEC 60079-7: 2015 +A1:2018
• UL 121201, 9th Ed., Rev. 2019-08-26
• UL 60079-0 ,7th Ed., Rev. 2020-04-15
• UL 60079-7 5th Ed. Rev. 2017-04-21
The following hazardous locations strings are provided on the router:
• Class 1, Div 2, Groups A B C D
• Class I, Zone 2, AEx ec IIC T4 Gc
• UL 21 ATEX 2512X
• Ex ec IIC T4 Gc
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide

Hazardous Locations Standards and Marking Strings

93