Chicco BebeCare oasys i-Size Manual page 28

• Chicco BebèCare does not interfere with the
normal operation of the Bluetooth® system
that may be present in the car.
• Constant access to smartphone position must
be permitted through localisation permissions
in order for the Chicco BebèCare app to sup-
port the full operation of the system.
WARNING:
• Check to perform each time Chicco BebèCare
is used:
• Check that is functioning correctly as de-
scribed in paragraph 3.1 How to activate
Chicco BebèCare point d).
• The smartphone must be turned on and have
a sufficient battery charge for the period of use
when paired with Chicco BebèCare.
• Bluetooth® must be active.
• "Airplane" mode must be deactivated.
• GPS must always be active.
• If two or more smartphones are used that have
the Chicco BebèCare APP installed, it is necessary
to identify which one is effectively connected
to the car seat and therefore must never be
abandoned.
3.1 HOW TO ACTIVATE CHICCO BEBÈCARE
a) Download the Chicco BebèCare APP
The Chicco BebèCare APP must be down-
loaded. When accessing for the first time,
the APP will provide all the instructions to
follow to register the account and use Chicco
BebèCare.
b) Create the family account
A "family account" must be created with a single
password. This account will be the only one that
can be used by those who use that specific car
seat with Chicco BebèCare.
The password is shared with all users who
interact with the car seat on which Chicco
BebèCare is installed.
IMPORTANT: When creating the family account,
an internet connection must be available (mo-
bile data or WiFi network).
IMPORTANT: If the family password is changed,
the new password must be shared with all the
users who use the same family account.
c) Enter the emergency numbers
The emergency numbers to which the alarm
messages will be sent must be entered upon
initial access (second level - see paragraph 3.2
How Chicco BebèCare functions) containing
the data needed to geolocate the area where
the baby is located.
A minimum of 1 to a maximum of 5 emergency
numbers must be entered.
The emergency numbers must be selected
from the contacts in your smartphone and can
be added, deleted and/or replaced in the future.
IMPORTANT: During this operation, an internet
connection must be available (mobile data or
WiFi network).
IMPORTANT: The emergency numbers must
be mobile phone numbers and not landline
or national emergency numbers.
IMPORTANT: Always check that the emergency
numbers are correct and are functioning after
entering them.
d) Associate the car seat with the family
account
To associate the car seat with Chicco BebèCare
to the family account , proceed with scanning
the QR code on the car seat. The QR code is
printed on the type approval label and can only
be seen after removing the silver film, scratch-
ing it with a coin. By scanning the QRCode, the
application recognises the car seat model, then
simply turn on Bluetooth®, apply pressure on
the car seat and move the smartphone near
the car seat to be associated and connect the
car seat with the family account.
Up to a maximum of 3 car seats with Chicco
BebèCare can be associated with the same
family account.
The specific car seat can be associated with
ONLY one family account.
IMPORTANT: If the QR code is already visible
or partially visible, contact Customer Service.
IMPORTANT: When scanning the QR code, an
internet connection must be available (mobile
data or WiFi network).
e) Check the correct operation of the
sensors
Periodically perform pressure tests on the car
28