Lenovo ThinkSystem D2 Manual page 57

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPSD0002G
Failure Predicted on [StorageVolumeElementName] for array
[ComputerSystemElementName].
FQXSPUN0009G
Sensor [SensorElementName] has asserted.
FQXSPUN0018J
Sensor [SensorElementName] has transitioned from normal to non-
critical state.
FQXSPUN0026G
Device [LogicalDeviceElementName] has been added.
FQXSPUN0056G
Sensor [SensorElementName] has asserted.
FQXSPBR4003I
Platform Watchdog Timer expired for [arg1].
FQXSPBR4007I
Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to complete.
FQXSPBR4008I
Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to start.
FQXSPCA0002M
Numeric sensor [NumericSensorElementName] going low (lower
critical) has asserted.
FQXSPCA0009M
Numeric sensor [NumericSensorElementName] going high (upper
critical) has asserted.
FQXSPCA0011N
Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has asserted.
FQXSPCA0017M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPCA0019N
Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.
FQXSPIO0003N
A diagnostic interrupt has occurred on system
[ComputerSystemElementName].
FQXSPIO0004L
A bus timeout has occurred on bus [SensorElementName].
FQXSPIO0006N
A software NMI has occurred on system
[ComputerSystemElementName].
FQXSPIO0011N
An Uncorrectable Error has occurred on [SensorElementName].
FQXSPMA0012M
An Over-Temperature Condition has been detected on the
[PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
FQXSPOS4002I
Watchdog [arg1] Failed to Capture Screen.
FQXSPOS4003I
Platform Watchdog Timer expired for [arg1].
FQXSPOS4010I
OS Crash Video Capture Failed.
FQXSPPU0001N
An Over-Temperature Condition has been detected on
[ProcessorElementName].
FQXSPPW0002L
[PowerSupplyElementName] has Failed.
FQXSPPW0007L
[PowerSupplyElementName] has a Configuration Mismatch.
FQXSPPW0035M
Numeric sensor [NumericSensorElementName] going low (lower
critical) has asserted.
Severity
Warning
Warning
Warning
Warning
Warning
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
.
Chapter 3
XClarity Controller events
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents