Lenovo ThinkSystem D2 Manual page 201

1. Check the following Lenovo support site for information on supported RAID adapters. http://www.
lenovo.com/us/en/serverproven/index.shtml
2. Ensure RAID adapter, LXPM, and UEFI firmware are at the latest levels.
3. Ensure the state of RAID adapter and disk drives are healthy.
4. Ensure good physical connection between the disk drives and RAID adapter.
5. Ensure the platform and RAID config is identical to original configuration.
6. Reboot the machine and retry the import of the RAID configuration.
7. If the problem persists, contact technical support.
• FQXPMCL0008I: Export uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0008K: Failed to export uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry to export uEFI setting.
2. Reboot and try the uEFI setting export again.
3. Reflash UEFI firmware.
4. If the problem persists, contact technical support.
• FQXPMCL0009I: Import uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0009K: Failed to import uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry the uEFI setting import.
2. Ensure that same system model type to import the uEFI setting and UEFI version should be the same.
3. Reboot and try to import a new clone of the UEFI settings.
4. Reflash UEFI firmware.
5. If the problem persists, contact technical support.
• FQXPMCL0010I: Export bmc settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0010K: Failed to export bmc settings.
Severity: Warning
.
Chapter 5 XClarity Provisioning Manager events
197