Lenovo ThinkSystem D2 Manual page 120

Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0089
User Action:
Information only; no action is required
• FQXSPPW2005I: [PowerSupplyElementName] has returned to a Normal Input State.
This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required
• FQXSPPW2006I: [PowerSupplyElementName] has returned to a Normal Input State.
This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required
• FQXSPPW2007I: [PowerSupplyElementName] Configuration is OK.
This message is for the use case when an implementation when a Power Supply configuration is OK.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0105
User Action:
Information only; no action is required
• FQXSPPW2008I: [PowerSupplyElementName] has been turned on.
This message is for the use case when an implementation has detected a Power Unit that has been
Enabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
116
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute
Node Messages and Codes Reference